The temperature controller shows the cold room temperature, and the low pressure gauge corresponds to the evaporation temperatureFor the cold room with static evaporator, the air in the cold room is in a state of natural convection, and the evaporation temperature is required to be 10~15℃ lower than

During the operation of cold room, some problems need to be paid attention to:1. To prevent frostbiteWhen entering the cold room, the operation personnel must take heat preservation measures to minimize the exposed parts of the body. The exposed parts must not be in direct contact with goods, pipes,

The way to deal with “cold bridge” in cold room is: because the outer surface of the cold room panel is metal, the thermal conductivity is good, so in the construction, the metal between the different temperature of the cold room or the storage outside cold room shall not be directly connected. The

1.The selection of copper pipe diameter should be strictly in accordance with the compressor suction and exhaust valve interface selection of pipe diameter.2.The suction surface of the condenser should keep a distance of more than 400mm from the wall, and the outlet should keep a distance of more th

How to check the air cooler of cold room before installation? (1/2)1. Check whether each part is loose after opening the outer package of the air cooler. If it is loose, it should be tightened again.2. Check whether the fan blade of the axial flow fan is firmly installed on the motor shaft, and whet

What should be paid attention to when using air cooler in cold room? 1 How should we choose suitable air cooler?Many users do not know how to choose the air cooler. The current market is full of many matching methods only based on the model. But the model cannot totally represent the cooling capacit

Which should we choose as evaporator of cold room？Air cooler or static evaporator? 1 Do cold room for fruit and vegetable use air cooler or static evaporator?Fresh cold room generally uses air cooler, because the turnover of fresh food is fast, in and out frequently. The cooling speed of the air coo

1. To prevent frostbiteThe operation personnel entering the cold storage must take heat preservation measures to minimize the exposed parts of the body. The exposed parts must not be in direct contact with goods, pipes, shelves, etc., in order to avoid frostbite. 2. To avoid being closed in the cold

Customers usually ask us, can I build this cold storage as both frozen cold storage and fresh cold storage? Although quick-freeze storage, frozen cold storage and fresh cold storage are all cold storages. There are differences in the use of performance and design for different use. If used interchan

The electrical control box of the medical cold storage adopts dual power supply, namely conventional power supply and standby power supply, to ensure that the medical cold storage is in a good power supply state.